New and Used Combilift, Linde, and Aisle-Master In Stock

2007 Linde H80D-900 (used)

Hours:

7,182 hrs.

Capacity:

17,500 lbs.

Fuel:

Diesel

Mast:

120.5" simplex (113" lowered)

Drive Tires:

8.25-15 x4

Steer Tires:

315/70-15

Options:

Forks: 8" x 2.75" x 48"

Attachment(s): Fork positioner, full cab with wipers

Equipment ID: E1X353U00394

For More information on this or any truck: Email Eric Lieser | Call Office


2018 Linde HT25CT (used)

Price:

$20,900.00

Hours:

883

Capacity:

5,000 lbs.

Fuel:

L/P

Mast:

192" Triplex

Drive Tires:

21" x 7" Pneumatic

Steer Tires:

16" x 6" Pneumatic

Options:

Upon delivery this unit will be fully refurbished. All features will operate as intended and this unit will come with a 30-day Major Parts Only Warranty that covers items like the motor and pumps. You will not be able to find a higher quality lift at a lower price anywhere else.

Industrial Parts and Service is one of the longest standing Linde dealers in North America. All of our low hour, fully refurbished Linde HT25CT’s are one owner units and were always operated under professional maintenance contracts. Our refurbishing process includes but is not limited to replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, and repairing any cosmetic damage.

Please contact Eric at Industrial Parts and Service Co. with any other questions.

ID# A11319J000191

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$22,900.00

Hours:

4,025

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H02521

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$28,900.00

Hours:

1,651

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H03059

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$25,900.00

Hours:

2,389

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H02516

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$25,900.00

Hours:

2,747

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H01659

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$25,900.00

Hours:

2,416

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H03105

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$25,900.00

Hours:

2,524

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 48"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H02531

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$31,900.00

Hours:

718

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H03941

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$25,900.00

Hours:

2,089

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H05512

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$25,900.00

Hours:

2,947

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H04548

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$25,900.00

Hours:

3,155

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H00616

For More information on this or any truck: Email Eric Lieser | Call Office


2014 Linde H30T (used)

Hours:

3,069 hrs.

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

27" x 10" Pneumatic

Steer Tires:

23" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H30T’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393E03346

For More information on this or any truck: Email Eric Lieser | Call Office


2019 Linde V15 (new)

Price:

$30,725.00

Hours:

40

Capacity:

3,000 lbs.

Fuel:

Electric 24V

Mast:

240" Triplex

Options:

This 2019 Linde V15 Order Picker is practically new with only 40 hours. This unit also comes with a 24V Deka battery that was purchased in November of 2022. Please contact Eric at Industrial Parts and Service with any other questions.

ID# C15215V00013

For More information on this or any truck: Email Eric Lieser | Call Office


2018 Linde HT25CT (used)

Price:

$18,900.00

Hours:

938

Capacity:

5,000 lbs.

Fuel:

L/P

Mast:

192" Triplex

Drive Tires:

21" x 7" Pneumatic

Steer Tires:

16" x 6" Pneumatic

Options:

Upon delivery this unit will be mechanically refurbished. All features will operate as intended and this unit will come with a 30-day Major Parts Only Warranty that covers items like the motor and pumps. You will not be able to find a higher quality lift at a lower price anywhere else.

Industrial Parts and Service is one of the longest standing Linde dealers in North America. All of our low hour, mechanically refurbished Linde HT25CT’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, this unit will have been mechanically refurbished. Our refurbishing process includes but is not limited to replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, and checking or replacing all fluids.

Please contact Eric at Industrial Parts and Service Co. with any other questions.

ID# A11319J00213

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (used)

Price:

$25,900.00

Hours:

3,794

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H03794

For More information on this or any truck: Email Eric Lieser | Call Office


2018 Linde H25T/600 (used)

Price:

$22,900.00

Hours:

2,982

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace. A Linde Hydrostatic Drive truck uses 20% less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is one of the longest standing Linde dealers in North America. All of our low-hour, mechanically refurbished Linde H25T/600’s are one-owner units and were always operated under professional maintenance contracts. Upon delivery, this unit will have been mechanically refurbished. Our refurbishing process includes but is not limited to replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, and checking or replacing all fluids. All features will operate as intended and this unit will come with a 30-day Major Parts Only Warranty that covers items like the motor and pumps. You will not be able to find a higher quality lift at a lower price anywhere else.

Please contact Eric at Industrial Parts and Service Co. with any other questions.

ID# H2X393J04376

For More information on this or any truck: Email Eric Lieser | Call Office


2018 Linde H25T/600 (used)

Price:

$22,900.00

Hours:

2,025

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace. A Linde Hydrostatic Drive truck uses 20% less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is one of the longest standing Linde dealers in North America. All of our low-hour, mechanically refurbished Linde H25T/600’s are one-owner units and were always operated under professional maintenance contracts. Upon delivery, this unit will have been mechanically refurbished. Our refurbishing process includes but is not limited to replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, and checking or replacing all fluids. All features will operate as intended and this unit will come with a 30-day Major Parts Only Warranty that covers items like the motor and pumps. You will not be able to find a higher quality lift at a lower price anywhere else.

Please contact Eric at Industrial Parts and Service Co. with any other questions.
elieser@industrialpartsandservice.com

ID# H2X393J04367

For More information on this or any truck: Email Eric Lieser | Call Office


2018 Linde H25T/600 (used)

Price:

$22,900.00

Hours:

3,662

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace. A Linde Hydrostatic Drive truck uses 20% less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is one of the longest standing Linde dealers in North America. All of our low-hour, mechanically refurbished Linde H25T/600’s are one-owner units and were always operated under professional maintenance contracts. Upon delivery, this unit will have been mechanically refurbished. Our refurbishing process includes but is not limited to replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, and checking or replacing all fluids. All features will operate as intended and this unit will come with a 30-day Major Parts Only Warranty that covers items like the motor and pumps. You will not be able to find a higher quality lift at a lower price anywhere else.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com

ID# H2X393J02070

For More information on this or any truck: Email Eric Lieser | Call Office


2018 Linde H25T/600 (used)

Price:

$25,900.00

Hours:

1,306

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace. A Linde Hydrostatic Drive truck uses 20% less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is one of the longest standing Linde dealers in North America. All of our low-hour, mechanically refurbished Linde H25T/600’s are one-owner units and were always operated under professional maintenance contracts. Upon delivery, this unit will have been mechanically refurbished. Our refurbishing process includes but is not limited to replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, and checking or replacing all fluids. All features will operate as intended and this unit will come with a 30-day Major Parts Only Warranty that covers items like the motor and pumps. You will not be able to find a higher quality lift at a lower price anywhere else.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com

ID# H2X393J02060

For More information on this or any truck: Email Eric Lieser | Call Office


2018 Linde H25CT (used)

Price:

$18,900.00

Hours:

3,033

Capacity:

5,000 lbs.

Fuel:

L/P

Mast:

186" Triplex

Drive Tires:

21" x 7" Cushion

Steer Tires:

16" x 6" Cushion

Options:

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace. A Linde Hydrostatic Drive truck uses 20% less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is one of the longest standing Linde dealers in North America. All of our low-hour, mechanically refurbished Linde H25CT’s are one-owner units and were always operated under professional maintenance contracts. Upon delivery, this unit will have been mechanically refurbished. Our refurbishing process includes but is not limited to replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, and checking or replacing all fluids. All features will operate as intended and this unit will come with a 30-day Major Parts Only Warranty that covers items like the motor and pumps. You will not be able to find a higher quality lift at a lower price anywhere else.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com

ID# A11313J00130

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$49,900.00

Hours:

3,044

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Industrial Parts and Service is one of the longest standing Combilift dealers in North America. This Combilift CB6000 is a low hour lease return that just came back from an indoor building supply center. When this unit was out on lease, all of its maintenance was facilitated by the factory. Upon delivery this unit will be fully refurbished. All mechanical features will operate as intended. Any broken or missing parts will be replaced, and all cosmetic damage will be repaired. Our refurbished Combilift CB6000's come with a 30-day Major Parts Only Warranty which covers items like the motor and pumps.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com
ID# 35272

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$46,900.00

Hours:

6,024 hrs.

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Industrial Parts and Service is one of the longest standing Combilift dealers in North America. This Combilift CB6000 is a low hour lease return that just came back from an indoor building supply center. When this unit was out on lease, all of its maintenance was facilitated by the factory. Upon delivery this unit will be fully refurbished. All mechanical features will operate as intended. Any broken or missing parts will be replaced, and all cosmetic damage will be repaired. Our refurbished Combilift CB6000's come with a 30-day Major Parts Only Warranty which covers items like the motor and pumps.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com

ID# 35268

For More information on this or any truck: Email Eric Lieser | Call Office


2013 Combilift C6000 (used)

Price:

$45,900.00

Hours:

4,190 hrs.

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

234" Triplex

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Industrial Parts and Service is one of the longest standing Combilift dealers in North America. This Combilift C6000 is a low hour lease return that just came back from an indoor building supply center. When this unit was out on lease, all of its maintenance was facilitated by the factory. Upon delivery this unit will be fully refurbished. All mechanical features will operate as intended. Any broken or missing parts will be replaced, and all cosmetic damage will be repaired. Our refurbished Combilift C6000's come with a 30-day Major Parts Only Warranty which covers items like the motor and pumps.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com
ID# 20862

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$52,900.00

Hours:

1,515 hrs.

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Industrial Parts and Service is one of the longest standing Combilift dealers in North America. This Combilift CB6000 is a low hour lease return that just came back from an indoor building supply center. When this unit was out on lease, all of its maintenance was facilitated by the factory. Upon delivery this unit will be fully refurbished. All mechanical features will operate as intended. Any broken or missing parts will be replaced, and all cosmetic damage will be repaired. Our refurbished Combilift CB6000's come with a 30-day Major Parts Only Warranty which covers items like the motor and pumps.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com
ID# 35279

For More information on this or any truck: Email Eric Lieser | Call Office


2018 Linde H25T/600 (used)

Price:

$20,900.00

Hours:

4,317

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burn out and replace. A Linde Hydrostatic Drive truck uses 20% less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is one of the longest standing Linde dealers in North America. All of our low-hour, mechanically refurbished Linde H25T/600’s are one-owner units and were always operated under professional maintenance contracts. Upon delivery, this unit will have been mechanically refurbished. Our refurbishing process includes but is not limited to replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, and checking or replacing all fluids. All features will operate as intended and this unit will come with a 30-day Major Parts Only Warranty that covers items like the motor and pumps. You will not be able to find a higher quality lift at a lower price anywhere else.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com

ID# H2X393J02068

For More information on this or any truck: Email Eric Lieser | Call Office


2014 Combilift CB6000 (used)

Price:

$46,900.00

Hours:

2,364 hrs.

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Industrial Parts and Service is one of the longest standing Combilift dealers in North America. This Combilift CB6000 is a low hour lease return that just came back from an indoor building supply center. When this unit was out on lease, all of its maintenance was facilitated by the factory. Upon delivery this unit will be fully refurbished. All mechanical features will operate as intended. Any broken or missing parts will be replaced, and all cosmetic damage will be repaired. Our refurbished Combilift CB6000's come with a 30-day Major Parts Only Warranty which covers items like the motor and pumps.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com

ID# 23946

For More information on this or any truck: Email Eric Lieser | Call Office


2018 Combilift CB6000 (used)

Price:

$49,000.00

Hours:

2,353 hrs.

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Industrial Parts and Service is one of the longest standing Combilift dealers in North America. This Combilift CB6000 is a low hour lease return that just came back from an indoor building supply center. When this unit was out on lease, all of its maintenance was facilitated by the factory. Upon delivery this unit will be fully refurbished. All mechanical features will operate as intended. Any broken or missing parts will be replaced, and all cosmetic damage will be repaired. Our refurbished Combilift CB6000's come with a 30-day Major Parts Only Warranty which covers items like the motor and pumps.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com

ID# 40561

For More information on this or any truck: Email Eric Lieser | Call Office


2014 Combilift CBE6000 (used)

Price:

$46,900.00

Hours:

4,378 hrs.

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Industrial Parts and Service is one of the longest standing Combilift dealers in North America. This Combilift CBE6000 is a low hour lease return that just came back from an indoor building supply center. When this unit was out on lease, all of its maintenance was facilitated by the factory. Upon delivery this unit will be fully refurbished. All mechanical features will operate as intended. Any broken or missing parts will be replaced, and all cosmetic damage will be repaired. Our refurbished Combilift CBE6000's come with a 30-day Major Parts Only Warranty which covers items like the motor and pumps.

Please contact Eric at Industrial Parts and Service Co. with any other questions. elieser@industrialpartsandservice.com

ID# 31674

For More information on this or any truck: Email Eric Lieser | Call Office


2024 Combilift CB6000 121" Spreader Bar (new)

Price:

$5,490.00

Hours:

0

Capacity:

Rated Capacity 5,660 lbs.

Fuel:

N/A

Mast:

N/A

Drive Tires:

N/A

Steer Tires:

N/A

Options:

New CB6000 121" Spreader Bar with custom aluminum storage stands.

Forks- 2" x 5" x 42"

For More information on this or any truck: Email Eric Lieser | Call Office


 Combilift C6000 Spreader Bars (used)

Capacity:

6,000 - 22,000 lbs

Options:

Wide Range of Spreader Bars

6,000 lbs to 22,000 lbs

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T / 600 (used)

Price:

$25,900.00

Hours:

2,548 hrs.

Capacity:

5,500 lbs.

Fuel:

LP

Mast:

196" Triplex

Drive Tires:

28" x 12.5"

Steer Tires:

22" x 9"

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H03121

For More information on this or any truck: Email Eric Lieser | Call Office


2015 Linde H25CT (used)

Price:

$16,900.00

Hours:

1,931 hrs.

Capacity:

5,000 lbs.

Fuel:

L/P

Mast:

192" Triplex

Drive Tires:

21" x 7" Cushion

Steer Tires:

16" x 6" Cushion

Options:

Forks- 4" x 1.75" x 42"

Dual Forward Lights, Side Shifter

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20% less fuel and costs 50% less to maintain than a traditional torque converter forklift.

This Linde H25CT was a one owner unit and has always operated under a professional maintenance contract.  It has been recently refurbished and is in "like new" condition both cosmetically and mechanically.

ID# A11313F00094

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25CT (used)

Price:

$16,900.00

Hours:

5,037 hrs.

Capacity:

5,000 lbs.

Fuel:

LP

Mast:

180" Triplex

Drive Tires:

21" x 7" Cushion

Steer Tires:

16" x 6" Cushion

Options:

Forks- 4" x 1.75" x 42"

Side Shift, Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20% less fuel and costs 50% less to maintain than a traditional torque converter forklift.

This Linde H25CT was a one owner unit and has always operated under a professional maintenance contract.  It has been recently refurbished and is in "like new" condition both cosmetically and mechanically.

ID# A11313H00068

For More information on this or any truck: Email Eric Lieser | Call Office


2006 Linde H25T (used)

Price:

$16,900

Hours:

8,843 hrs.

Capacity:

5,000 lbs.

Fuel:

LP

Mast:

189.5" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 42"

Side Shifter, Lighted Clip Board, and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

This Linde H25T was a one owner unit and has always operated under a professional maintenance contract.  It has been recently refurbished and is in "like new" condition both cosmetically and mechanically.

ID# H2X393B01357

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$52,900.00

Hours:

1,108 hrs.

Capacity:

6,000 lbs.

Fuel:

LP

Mast:

276"

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 10" Pneumatic

Options:

Forks- 42"

Side Shift, Fork Positioner, 2 Forward and 2 Side Lights

Industrial Parts and Service is the largest Combilift dealer in North America. All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 37475

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$52,900.00

Hours:

1,396 hrs.

Capacity:

6,000 lbs.

Fuel:

LP

Mast:

236"

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 10" Pneumatic

Options:

Forks- 42"

Side Shift, Fork Positioner, 2 Forward and 2 Side Lights

Industrial Parts and Service is the largest Combilift dealer in North America. All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35266

For More information on this or any truck: Email Eric Lieser | Call Office


2015 Linde H25T / 600 (used)

Price:

$25,900.00

Hours:

3,108 hrs.

Capacity:

5,500 lbs.

Fuel:

LP

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393F01762

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T / 600 (used)

Price:

$22,900.00

Hours:

4,247 hrs.

Capacity:

5,500 lbs.

Fuel:

LP

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H03979

For More information on this or any truck: Email Eric Lieser | Call Office


2015 Linde H25T / 600 (used)

Price:

$29,900.00

Hours:

901 hrs.

Capacity:

5,500 lbs.

Fuel:

LP

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393F01732

For More information on this or any truck: Email Eric Lieser | Call Office


2014 Linde H25T / 600 (used)

Price:

$22,900.00

Hours:

3,772 hrs.

Capacity:

5,500 lbs.

Fuel:

LP

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393E00827

For More information on this or any truck: Email Eric Lieser | Call Office


2016 Linde H25T / 600 (used)

Price:

$25,900.00

Hours:

2,325 hrs.

Capacity:

5,500 lbs.

Fuel:

LP

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393G03111

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T / 600 (used)

Price:

$22,900.00

Hours:

5,233 hrs.

Capacity:

5,500 lbs.

Fuel:

LP

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H00596

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Linde H25T/600 (new)

Price:

$31,900.00

Hours:

1,632

Capacity:

5,500 lbs.

Fuel:

L/P

Mast:

196" Triplex

Drive Tires:

28" x 12.5" Pneumatic

Steer Tires:

22" x 9" Pneumatic

Options:

Forks- 4" x 1.75" x 42"

Side Shifter and Dual Forward Lights

Linde Hydrostatic Drive- This means that there are no longer any brakes, gears, or transmissions to burnout and replace.  A Linde Hydrostatic Drive truck uses 20%  less fuel and costs 50% less to maintain than a traditional torque converter forklift.

Industrial Parts and Service is the largest Linde dealer in North America. All of our low hour, refurbished Linde H25T/600’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# H2X393H02870

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift C12000XL (used)

Hours:

3,205

Capacity:

12,000 lbs.

Fuel:

L/P

Mast:

159" Duplex - Free Lift

Drive Tires:

23 x 10-12

Steer Tires:

28 x 12.5-15

Options:

Platform- 60" Long / 16" Wide

Forks- 8" x 2 x 56"

LED Work Lights

Enclosed Cab with Wipers

For More information on this or any truck: Email Eric Lieser | Call Office


Refurbished Combilift WFC CB6000 121" Spreader Bar (used)

Price:

$5,490.00

Hours:

0

Capacity:

5,660 lbs.

Options:

This is a refurbished 121" Combilift CB6000 Spreader Bar with 42" forks and custom aluminum storage stands.


ID# A-1748

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$49,900.00

Hours:

3,125

Capacity:

6,000 lbs.

Fuel:

LP

Mast:

236" Triplex

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 10" Pneumatic

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shifter

Industrial Parts and Service is the largest Combilift dealer in North America.  All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts.  Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically.  Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35399

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$49,900.00

Hours:

2,551

Capacity:

6,000 lbs.

Fuel:

LP

Mast:

275" Triplex

Drive Tires:

16" x 7" Pneumatic

Steer Tires:

22" x 10" Pneumatic

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shifter

Industrial Parts and Service is the largest Combilift dealer in North America.  All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts.  Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically.  Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35274

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$45,900.00

Hours:

6,024 hrs.

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7"

Steer Tires:

22" x 10"

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shift

Industrial Parts and Service is the largest Combilift dealer in North America.  All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts.  Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically.  Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35268

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$49,900.00

Hours:

2,409

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7"

Steer Tires:

22" x 10"

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shift

Industrial Parts and Service is the largest Combilift dealer in North America. All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35280

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$52,900.00

Hours:

1,184

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7"

Steer Tires:

22" x 10"

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shift

Industrial Parts and Service is the largest Combilift dealer in North America. All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35270

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$52,900.00

Hours:

1,174

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7"

Steer Tires:

22" x 10"

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shift

Industrial Parts and Service is the largest Combilift dealer in North America. All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35271

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$49,900.00

Hours:

3,464

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7"

Steer Tires:

22" x 10"

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shift

Industrial Parts and Service is the largest Combilift dealer in North America. All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35269

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$49,900.00

Hours:

3,161

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7"

Steer Tires:

22" x 10"

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shift

Industrial Parts and Service is the largest Combilift dealer in North America. All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35265

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$49,900.00

Hours:

2,716

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7"

Steer Tires:

22" x 10"

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shift

Industrial Parts and Service is the largest Combilift dealer in North America. All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35273

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$49,900.00

Hours:

2,301

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7"

Steer Tires:

22" x 10"

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shift

Industrial Parts and Service is the largest Combilift dealer in North America. All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 35277

For More information on this or any truck: Email Eric Lieser | Call Office


2017 Combilift CB6000 (used)

Price:

$52,900.00

Hours:

2,058

Capacity:

6,000 lbs.

Fuel:

L/P

Mast:

236" Triplex

Drive Tires:

16" x 7"

Steer Tires:

22" x 10"

Options:

Forks: 42"

Carriage: Fork Positioner and Side-Shift

Industrial Parts and Service is the largest Combilift dealer in North America. All of our low hour, refurbished Combilift CB6000’s are one owner units and were always operated under professional maintenance contracts. Upon delivery, these units will have been fully refurbished and in “Like New” condition both cosmetically and mechanically. Our refurbishing process includes but is not limited to: replacing all bad or missing parts, inspecting the wire harness, checking and replacing tires if needed, making sure there are no leaks, checking or replacing all fluids, replacing or repairing body damage and repainting the unit.

ID# 36757

For More information on this or any truck: Email Eric Lieser | Call Office


[/brand]